Cressi XS2/AC2 Regulator, XS Octopus Package and Mini Gauge

Description

Cressi XS2/AC2 Regulator, XS Octopus Package and Mini Gauge
SKU: PCKXS2G
Mfr. Part: PCKXS2G
Item Includes
1'st Stage - 2'nd Stage - Octopus - Low Pressure Hoses - Pressure Gauge - High Pressure Hose - Owner's Manual
Description
The XS2/AC2 Regulator is an exceptionally dependable non-balanced flow-by-piston designed 1'st stage regulator that is a great choice as a new diver's rig, or for use as a stage bottle regulator system. The 1'st stage has 1 HP port and 4 LP ports and is made from marine grade chromed brass for long life and durability. A conical filter is used which has greater surface area for higher air flow characteristics through the 1'st stage regulator.
The XS2 Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2'nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Regulator comes with a comfortable silicone mouthpiece. The XS2 Compact AC2 Regulator weighs 35 oz. (994 g) with the hose and comes with an owner's manual. Regulator is certified to EN250/2000 standards.
The XS Octopus is a lightweight, high performance second stage regulator. The XS has a Venturi dive/pre-dive switch which will help control the sensitivity of the regulator when not in use, yet when switched from the pre-dive to dive position the regulators performance will instantly increase. The XS Octopus has a dependable downstream demand valve mechanism for reliable performance. The XS Octopus is equipped with a 39" (100cm) 3/8" threaded hose, has a yellow front cover for easy identification in an out-of-air-emergency. The regulator has a soft and comfortable liquid silicone mouthpiece and the housing is made of durable impact resistant hi-tech polymers. The regulator weighs 7.27 oz. (206 g) without the hose and 12.7 oz. (359 g) with the hose. Regulator is certified to Annex B EN 250.2014 standards.
The Cressi Mini-Manometer Pressure Gauge luminescent dial reads from 0 to 5000 psi. For at-a-glance monitoring of air pressure the instruments face is divided into three different colored zones: 600 psi and below is highlighted in red with a solid bar and red stripes. If gauge is used on deeper dives, the red scale extends and fades to 1,300 psi, this provides for added reserve air indication required at greater depths. From 600 to approximately 3,000 psi is green and from 3,000 to end of scale is blue.
The front glass lens is made to act as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape. The instrument is housed in a small, modern shaped boot, made from polycarbonate and Desmopan, (a thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very lightweight. The pressure gauge housing is durable chrome plated brass. The gauge boot has an attachment point for a clip or lanyard. Pressure gauge is equipped with a 7/16" threaded high-pressure hose. The package is made in Italy.
Features
Cressi XS2/AC2 Regulator, XS Octopus Package and Mini Gauge:
Complete Regulator System
Primary, Octopus and Analog Pressure Gauge
Owner Manual's
Manufactured in Italy
Cressi XS2/AC2 Piston Regulator:
Weight: 35 oz. (994 g) with Hose
Lightweight Jacketed 3/8" Threaded Low Pressure (LP) Hose
Certified to EN250/2014 Standards
First Stage: Cressi AC2 Regulator
Non-Balanced Piston Design
Construction: Durable Marine Grade Chromed Brass
1 HP Port 7/16" Thread
4 LP Ports 3/8" Thread
Conical Filter
Second Stage: Cressi XS2 Compact Regulator
Reliable Downstream Demand Valve
Comfortable Mouthpiece
Construction: Polymer Plastic
Dive/Pre-Dive Venturi Adjustment
Cressi XS Octopus:
High Performance Design
Lightweight, Second Stage Regulator
Dependable Downstream Demand Valve Mechanism for Reliable Performance
Venturi Dive/Pre-Dive Switch Prevent Free-Flow when Not in Use
39" (100cm) 3/8" Threaded Hose
Yellow Front Cover for Easy Identification in an Out-of-Air-Emergency
Housing: Hi-Tech Polymer Material for Strength and Durability
Soft and Comfortable Liquid Silicone Mouthpiece
Weight (w/Hose): 12.7 oz. (359 g)
Certified to Annex B EN 250.2014 Standards
Cressi Mini SPG (Imperial):
Small and Compact
0 to 5000 psi Readout
Chrome Plated Brass Case
Unique Glass Lens Pressure Relief Valve
Luminescent Color-Coded Dial
Color Zones:
0 to 600 psi Highlighted-in-Red, Solid-Bar and Red Stripes
Deeper Dives Reserve; Red-Scale Extends and Fades to 1,300 psi
Safe Air Zone; 600 psi to Approximately 3,000 psi Green and 3,000 psi to Full Scale is Blue
7/16' Threaded High-Pressure Hose
High Quality Instrument
Large Circular Easy-to-Read Scale
Small, Modern Shaped Boot
Boot Material:
Durable Polycarbonate & Desmopan
Desmopan; Thermoplastic Polyurethane
Protection from Shocks, Scratches & Very Lightweight
Eyelet for Fastening Instrument to BCD or Harness with Clip or Lanyard
Specifications
Regulators:
----
1'st Stage Type
Non-Balanced Flow-By Piston
LP Ports
Four 3/8" Thread
HP Ports
One 7/16" Thread
Adjustable 2'nd Stage
Yes, Dive/Pre-Dive Venturi Adjustment Switch
2'nd Stage Type
Downstream Demand Valve
Materials
First Stage: Chromed Brass
Second Stages: Techno-Polymers
Rubber Parts: Silicone & Buna-N O-Rings
Hose Thread
3/8"
Hose Length
Primary: Not Specified by Manufacturer
Octopus: 39" (100 cm)
Total Weight
Primary: 35 oz. (994 g) w/Hose
Octopus: 12.7 oz. (359 g) w/Hose
Pressure Gauge:
----
Pressure Gauge Materials
Case: Chromed Brass
Lens: Glass
Boot: Polycarbonate & Desmopan
Pressure Readout
0 to 5000 psi
Luminous Dial
Yes
Attachment Point
Not Specified by Manufacturer
Threads
7/16"
Feedback is a very powerful tool. It gives sellers a reason to conduct business at the highest level of honesty & respect. If you feel like you have a reason to leave neutral or negative feedback, please contact us beforehand, I’m sure we can work it out.
Please contact us using the ASK A QUESTION link found at the bottom of the page
.
About us
Many years ago Leisure Pro was the first Internet-based divers supply company. We're still the number one store for scuba diving and snorkeling equipment. Thousands and thousands of satisfied customers swear by our service.
Contact Us
Got a question?
Please contact us using the ASK A QUESTION link found at the bottom of the page
Hours:
Mon-Thu: 9:30-5:30, Friday: 9:30-12:30
Relist
Please do not request to have an item relisted if you do not see it any more. If we are able to relist, we will do so even without your request.
Item availability
We will only post items that are in stock, ready to ship.
Payment / Shipping
Payment
Paypal is our only method of payment. When you are using Paypal, you must go through our secure verification system, for which you will have to supply a verified shipping address with a matching telephone number.
Items can be returned within 30 Days of purchase, and must be returned in original packaging, pending a return authorization.
Shipping
Most purchases are shipped within 1 day of payment.
We will not ship outside of the USA.
We supply tracking information 24 hours after the shipment leaves our warehouse. Please check your email and/or Ebay messages & make sure our email doesn’t go into spam or junk.
No store pick-ups for Ebay items.
We will not mark any package as a gift.
We do not ship to PO boxes.
We ship to APO or FPO addresses, please contact us for more information.
Tracking
There is no need to email us for tracking info. You will get that automatically.
Returns
We think you'll agree that Leisure Pro has the best return policy in the industry.
You have 60 days from the date of invoice to return the merchandise for full refund.
Inspect the equipment when it arrives, and if you're not fully satisfied you can return it for a full refund (less the shipping charge) as long as you haven't used it. We won't even ask why you've changed your mind.
You'll need the original manufacturers labeled packaging with all materials, manuals and blank warranty cards.
Books, CD’s, DVD’s may not be returned (due to copyright laws). Sorry.
Merchandise returned in used condition or not in its original packaging may be refused, and the carrier will charge you freight in both directions.
Please allow 2 days from the date we received the package for us to process your return.
ate we received the package for us to process your return.