Cressi Start Equipment for Scuba Diving ~ Includes Start BCD, XS2/AC2 Regulator,

Description

Cressi Start Equipment for Scuba Diving ~ Includes Start BCD, XS2/AC2 Regulator,
SKU: CSBSTPCK
Item Includes
1'st Stage - 2'nd Stage - Octopus - Low Pressure Hoses - Instrument Console - BCD - LP Quick-Disconnect - Owner Manuals - Cressi 2 Year Limited Warranty
Description
If you're looking for a durable, strong and almost bulletproof BCD jacket than the Start is what you are looking for. Constructed from extremely Strong 500 and 1000-Denier Cordura, with excellent buoyancy, even on smaller sizes the Start full jacket BCD fits the bill. Designed with the demanding use of dive training and rental facilities in mind this BCD will give the sport diver years of dependable use.
The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. There are two plastic D-rings and two additional snap hooks for attachment of instruments and accessories. If used at dive facilities a size indicator is highly visible on the right shoulder.
BCD has two large accessory storage pockets with hook and loop closures, and the adjustable sternum straps along with both torso adjustment and waist straps are equipped with f ±squeeze-style" side-release buckles for easy donning and doffing. The waist strap/cummerbund assembly is independently suspended from the air cell allowing the air cell to inflate away from the diver preventing the f ±squeeze-effect" when inflated. The backpack is rigid for support and stability of the cylinder yet is fully padded for comfort. The Cressi Start BCD come with a 3/8" threaded quick-disconnect low-pressure hose and owner's manual.
Buoyancy in: lbs. / kg / size
29.2 lbs. / 13.3 kg / XS
31.5 lbs. / 14.3 kg / S
33.7 lbs. / 15.3 kg / M
38.1 lbs. /17.3 kg / L
44.9 lbs. / 20.4 kg /XL
The XS2/AC2 Regulator is an exceptionally dependable non-balanced flow-by-piston designed 1'st stage regulator that is a great choice as a new diver's rig, or for use as a stage bottle regulator system. This simple yet fail-safe design will deliver gas even if there is a first stage failure. The 1'st stage has 1 HP 7/16" threaded port, 4 LP 3/8" threaded ports and is made from marine grade chromed brass for long life and durability. A conical filter is used which has greater surface area for higher air flow characteristics through the 1'st stage regulator.
The XS2 Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2'nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Regulator comes with a comfortable silicone mouthpiece. The XS2 Compact AC2 Regulator weighs 35 oz. (994 g) with the hose and comes with an owner's manual. Regulator is certified to EN250/2000 standards and is made in Italy.
The XS Octopus is a lightweight, high performance second stage regulator. The XS has a Venturi dive/pre-dive switch which will help control the sensitivity of the regulator when not in use, yet when switched from the pre-dive to dive position the regulators performance will instantly increase. The XS Octopus has a dependable downstream demand valve mechanism for reliable performance. The XS Octopus is equipped with a 33" (84cm) 3/8" threaded hose, has a yellow front cover for easy identification in an out-of-air-emergency. The regulator has a soft and comfortable liquid silicone mouthpiece and the housing is made of durable impact resistant hi-tech polymers. The regulator weighs 7.27 oz. (206 g) without the hose and 12.7 oz. (359 g) with the hose. Regulator is certified to Annex B EN 250.2014 standards. Regulator is Italian made.
The Cressi Mini 2 Gauge Console Global is a small compact console that houses the Cressi Mini-Manometer Pressure Gauge and a small, analog depth gauge. Both gauges are ready to travel the world with you with both imperial and metric gauge face readouts. A true world travel instrument console. Both gauges are high-quality instruments with the pressure gauge built with a chrome plated brass case and the depth gauge has a diaphragm membrane actuated function. Both gauges have a large circular easy-to-read scale. The instruments are housed in a small, modern shaped console boot, made from polycarbonate and desmopan, (a thermoplastic polyurethane) two materials that guarantee protection from shocks, scratches and which, at the same time, is very light. At the end of the console, slightly to the sides, there are two eyelets for fastening the instrument to the BCD or harness with a clip or lanyard so that it does not hang down with the risk of catching and damaging the environment or the instruments.
The luminescent face of the 230' (70m) depth gauge, the first 40' (12m) of depth readings are in 10' (3m) increments, (which correspond to the area of decompression stops) and are widely spaced for ease-of-reading. For at-a-glance monitoring of depth, the face is divided into 2-different colored zones: white up to 120' (40m) and red from 120' (40m) to the end of the scale. The instrument has a maximum depth indicator that stops on the maximum depth reached during the dive. This function is extremely handy for logging of dive information.
The Mini Global Pressure Gauge luminescent dial reads from 0 to 5000 psi (0 to 350 bars). Like the depth gauge the instruments face is divided into different colored zones for at-a-glance monitoring of air the area from 0 to 600 psi (0 to 50 bars) and is highlighted in red with a solid bar and red stripes. The gauge has a built-in pressure relief valve. Pressure gauge is equipped with a 7/16" threaded high-pressure hose. The instrument console is made in Italy.
Features
Cressi Start Equipment for Scuba Diving:
Complete Scuba Life Support System
Regulator, Octopus, BCD & Analog Gauge Console
Owner Manuals
Available in Multiple Sizes
Cressi Start BCD:
Designed Primarily As-Rental BC for Resorts & Dive Schools
Strong Enough to Rent Bullet-Proof Construction for Recreational Divers
Stability of Jacket Style BC
1000 & 500 Denier Cordura Construction
Large, Easily Seen Size Markings On-Shoulder
2 Large Cargo Pockets w/Hook & Loop Closures
Plastic D-Rings for Accessory Attachment
Rigid Padded Backpack & Carry Handle: Stability & Ease of Transport
Buoyancy Control:
3-Exhaust/Overpressure Relief Valves
2-Vlaves w/Pull Dump Handle (Right Shoulder/Lower Rear)
Cressi's Power Inflator w/Cable Activated Pull Dump
3/8" Threaded Low Pressure Quick-Disconnect Hose
Torso Adjustable Shoulders
Adjustable Sternum Strap
Adjustable Waist Strap w/Cummerbund Pad for Comfort
All Straps Equipped w/Squeeze-Style Side-Release Buckles for Quick/Easy Donning & Doffing
Lift Capacities: 29.2 lbs. to 45 lbs. (13.25 kg to 20.4 kg) Size Dependent
Single Cam Cylinder Band
Weight: 35 oz. (994 g) w/Hose
Lightweight Jacketed 3/8" Threaded Low Pressure (LP) Hose
XS2/AC2 Regulator:
Simple Yet Reliable Design
First Stage:Cressi AC2 Regulator
Non-Balanced Flow-By-Piston Design
Fail-Safe Design Delivers Gas Even if First Stage Fails
Construction: Durable Marine Grade Chromed Brass
1 HP Port 7/16" Thread
4 LP Ports 3/8" Thread
Conical Filter
Second Stage:Cressi XS2 Compact Regulator
Reliable Downstream Demand Valve
Comfortable Mouthpiece
Construction: Polymer Plastic
Dive/Pre-Dive Venturi Adjustment
Octopus: Cressi XS
High Performance Design
Lightweight, Second Stage Regulator
Dependable Downstream Demand Valve Mechanism for Reliable Performance
Venturi Dive/Pre-Dive Switch Prevent Free-Flow when Not-In-Use
33" (84cm) 3/8" Threaded Hose
Yellow Front Cover for Easy Identification in Out-of-Air-Emergency
Housing: Hi-Tech Polymer Material for Strength & Durability
Soft and Comfortable Liquid Silicone Mouthpiece
Weight (w/Hose): 12.7 oz. (359 g)
Certified to Annex B EN 250.2014 Standards
Made in Italy
Cressi Mini 2 Gauge Console Global:
Streamline 2-Gauge Console
Readouts-In Imperial & Metric
High Quality Instruments
Chrome Plated Brass Cases
Large Circular Easy-to-Read Scales
Small, Modern Shaped Console Boot
Boot Material: Durable Polycarbonate & Desmopan, (Thermoplastic Polyurethane)
Protection from Shocks, Scratches & Very Lightweight
Eyelets for Fastening Instrument to BCD or Harness w/Clip or Lanyard
Italian Made
Depth Gauge:
Luminescent Color-Coded Dial
0' to 230' (0 to 70m) Gauge Scale
Maximum Depth Indicator, Extremely Handy for Logging Dive Information
Diaphragm Membrane Actuated
Pressure Gauge:
0 to 5000 psi (0 to 350 bars) Gauge Scale
Built-In Pressure Relief Valve
Luminescent Color-Coded Dial
7/16' Threaded High-Pressure Hose
Specifications
1'st Stage Type
Non-Balanced Flow-By Piston
LP Ports
Four, 3/8" Threaded
HP Ports
One, 7/16" Threaded
Adjustable 2'nd Stage
Dive/Pre-Dive Venturi Adjustment
2'nd Stage Type
Downstream Demand Valve
Regulator Materials
First Stage: Chromed Brass
Second Stage: Polymer Plastic, Silicone Rubber
Hose Thread
3/8"
Hose Length
Primary; Not Specified by Manufacturer
Octopus; 39" (100cm)
Total Weight
Primary: 35 oz (994g) w/Hose
Octopus: 4.76 oz (135g), w/o Hose
Regulator
BC Body
Jacket Style
Buoyancy Bag
XS: 29.2 lbs (13.25kg)
SM: 31.5 lbs (14.29kg)
MD: 33.7 lbs (15.29kg)
LG: 38.2 lbs (17.33kg)
XL: 45 lbs (20.4kg)
Valves
Right Shoulder & Lower Rear Over-Pressure Relief/Pull Dump Valve
Left Shoulder Cable Activated Pull Dump
Pockets
2-Pockets w/Hook & Loop Closures
Shoulder Straps
Adjustable Torso Straps w/Squeeze-Style Side Release Buckles
D-Rings
4 Plastic
Waist Strap
Adjustable Waist Strap w/Squeeze-Style Side Release Buckle & Cummerbund Pad
Chest Buckle
Adjustable Sternum w/Squeeze-Style Side Release Buckle
Oral Inflator
Cressi Power Inflator w/Cable-Activated Pull Dump
BCD Materials
Internally Urethane Laminated 1000 & 500 Denier Cordura
Weight Integrated
Yes
Weight Capacity
Releasable: 20 lbs (9kg)
BCD
Materials
Case: Chrome Plated Brass
Lens: Glass
Console Boot: Polycarbonate & Desmopan
Readout
0 to 5000 psi (0 to 350 bars)
Luminous Dial
Yes
Attachment Point
Yes
Threads, SPG Hose
7/16"
Pressure Gauge
Material
Case: Chromed Brass
Gauge Readout
0 to 230' (0 to 70m)
Luminous Dial
Yes
Max Depth Indicator
Yes
Feedback is a very powerful tool. It gives sellers a reason to conduct business at the highest level of honesty & respect. If you feel like you have a reason to leave neutral or negative feedback, please contact us beforehand, I’m sure we can work it out.
Please contact us using the ASK A QUESTION link found at the bottom of the page
.
About us
Many years ago Leisure Pro was the first Internet-based divers supply company. We're still the number one store for scuba diving and snorkeling equipment. Thousands and thousands of satisfied customers swear by our service.
Contact Us
Got a question?
Please contact us using the ASK A QUESTION link found at the bottom of the page
Hours:
Mon-Thu: 9:30-5:30, Friday: 9:30-12:30
Relist
Please do not request to have an item relisted if you do not see it any more. If we are able to relist, we will do so even without your request.
Item availability
We will only post items that are in stock, ready to ship.
Payment / Shipping
Payment
Paypal is our only method of payment. When you are using Paypal, you must go through our secure verification system, for which you will have to supply a verified shipping address with a matching telephone number.
Items can be returned within 30 Days of purchase, and must be returned in original packaging, pending a return authorization.
Shipping
Most purchases are shipped within 1 day of payment.
We will not ship outside of the USA.
We supply tracking information 24 hours after the shipment leaves our warehouse. Please check your email and/or Ebay messages & make sure our email doesn’t go into spam or junk.
No store pick-ups for Ebay items.
We will not mark any package as a gift.
We do not ship to PO boxes.
We ship to APO or FPO addresses, please contact us for more information.
Tracking
There is no need to email us for tracking info. You will get that automatically.
Returns
We think you'll agree that Leisure Pro has the best return policy in the industry.
You have 60 days from the date of invoice to return the merchandise for full refund.
Inspect the equipment when it arrives, and if you're not fully satisfied you can return it for a full refund (less the shipping charge) as long as you haven't used it. We won't even ask why you've changed your mind.
You'll need the original manufacturers labeled packaging with all materials, manuals and blank warranty cards.
Books, CD’s, DVD’s may not be returned (due to copyright laws). Sorry.
Merchandise returned in used condition or not in its original packaging may be refused, and the carrier will charge you freight in both directions.
Please allow 2 days from the date we received the package for us to process your return.
ate we received the package for us to process your return.